Risk Management and Risk Management Writing: Secrets for Avoiding Liability and Creating Accurate Powerful Documents 2009/03/24  2-days Orlando, FL This will be a combination workshop of the Risk Management and Risk Avoidance Writing classes. Risk Management for Medical Devices in Compliance with ISO 14971 teaches the purpose of risk management as required by the regulatory authorities around the world. Risk Management Writing teaches how a firm through its written communication can demonstrate the firm’s risk management  more...

Can You Prove Your Product Conforms to Functional Safety Requirements? Testing and Certification Experts TÜVRheinland Offers Free Webinar on Function Safety, March 24 2009/03/24  March 24 Webinar Standards for Functional Safety are changing how global manufacturers implement safety in product design. In response, TÜVRheinland, the premier supplier of global testing, assessment and certification services, is offering a free webinar on Functional Safety requirements called “Can You Prove Your Product Confirms to Functional Safety Requirements?” The webinar will focus on the Functional Safety requirements of a variety of products such as programmable electronic systems, electronic measuring and monitoring equipment, process automation and controls, and industrial machinery. The webinar targets attendees who must understand functional safety in more detail. Examples include engineers and product managers who target a worldwide market and need to certify both simple and complex products for functional safety. A range of topics will be presented during the webinar such as: How to confirm if IEC 61508 is relevant to your particular product or Understanding Functional Safety from the perspective of a Design Engineer or Product Engineer/Manager targeting a worldwide market Recognizing that a product is part of the safety loop and when it needs to be certified for Functional Safety During the informative seminar, attendees will learn about Functional Safety, examples of products and systems requiring certification, and a recommended approach to a Functional Safety product/system assessment. A guest speaker from a world class automation supplier will discuss how changes in technology have impacted their approach to integrated safety. Attendees will also have an opportunity to participate in a Q&A session at the end of the hour.  more...

Globalability: The Key to International Compliance 2009/03/25  2-days Brea, CA Is the world your marketplace? Spend two days with UL to learn how to identify and comply with product regulations in your key international markets, and then leverage the similarities and differences among those markets to develop a compliance strategy that can deliver the results you're looking for. Whether you're in one market or many, this workshop will help you stay on top of the global compliance game. Get essential facts about China's 3C Mark, Japan's DENAN Program and the associated marks for prescribed and non-prescribed products, Mexico's NOM Mark and the Federal Law of Metrology and Standardization, plus the Republic of Korea's K Mark and Safety Certification Scheme. The workshop additionally addresses Europe's CE Marking and provides key information on other markets, including Australia, Argentina, and the Russian Federation.   more...

Industrial Control Panel UL 508A and Short-Circuit Current Ratings 2009/03/25  1 1/2 days Kansas City, MO This comprehensive one and a half-day workshop provides technical information to industrial control panel professionals. The workshop is ideal for those who need to understand the safety compliance requirements of the UL 508A Standard for industrial control panels, as well as the new requirements found in the National Electrical Code (NEC) Article 409 and UL 508A Supplement SB.  more...

Reverberation Chamber Technician Training 2009/03/26  March 26 - 27 Oklahoma State University, Stillwater, OK This course is designed especially for technicians who will be involved in radiated emission or immunity testing of commercial or military systems using reverberation chambers. The course includes demonstrations, test setups and instrumentation, statistical sampling techniques (mechanical tuner operation and frequency sweeps), chamber characterization, calibration measurements and a series of hands-on experiments conducted in 4 to 5 person groups.  more...

WESTEC 2009 Exposition 2009/03/30  March 30 - April 2 Los Angeles, CA Get through this tough economy and attend WESTEC 2009! Now is not the time to fall behind. Now is the time to get ahead of the game, look for new ideas, network and get free education that will keep you competitive in this changing economy. At WESTEC 2009 you will see over 260 new products and nearly 500 industry leading exhibitors from advanced machine tools, cutting tools and accessories, manufacturing applications, emerging technologies along with highly skilled manufacturing professionals that will provide aggressive ideas and the hottest trends all in one place.  more...

Reverberation Chamber Theory and Experiment Short Course 2009/03/30  March 30 - April 4 Oklahoma State University, Stillwater, OK The course is designed for engineers who will be involved in radiated emission or immunity testing of commercial or military systems using reverberation chambers. The theory portion will cover the statistical nature of reverberation chamber testing, characterization of the EM test conditions, and the tradeoff between uncertainty in test results and test time. The experiments and demonstrations include typical measurement techniques, chamber calibration, immunity, emission, and pulse testing in reverberation chambers.  more...

ITE: Designing for Compliance to UL 60950-1 2nd Edition, CAN/CSA-C22.2 No. 60950-1-07; 2007 and IEC 60950-1 2nd edition; 2005 2009/04/01  April 1-2, 2009 Toronto, ON Join Underwriters Laboratories® for our newly developed and redesigned workshop on Information Technology and Communications Equipment: Designing for Compliance to UL 60950-1 2nd Edition, CAN/CSA-C 22.2 No. 60950-1-07; 2007 and IEC 60950-1 2nd edition; 2005. Understanding the risks and how product safety standards address these risks can better equip you to design your products for compliance and meet international market requirements. In this two-day workshop we will review product safety from a technical design perspective. Experienced UL instructors will cover a broad range of technical topics from circuits and isolation to over-voltage and acoustic pressure. We’ll also review design considerations that can help you reduce risk in these various applications. You’ll learn about other key compliance topics and how UL’s online tools can help you select critical components, international licensing and how compliance is documented in IECEE CB Scheme style reports. Participants will be provided with all the critical information needed to design for compliance to national and international standards widely used in the industry for safety of information technology and communications equipment.   more...

Designing for Compliance to IEC 60601-1 2nd Edition 2009/04/01  April 1-2, 2009 Princeton, NJ This workshop is presented by experienced UL engineers who evaluate products for certification to U.S. and international standards for medical equipment. This two-day workshop will help you gain a thorough understanding of how to use IEC 60601-1 and UL 60601-1 effectively. A copy of the Standard is included with your workshop materials.  more...

Audio, Video and Similar Electronic Apparatus: Designing for Compliance to IEC 60065 and UL 60065 - 7th Edition 2009/04/07  April 7-8, 2009 San Jose, CA The seventh edition of UL 60065 is harmonized with the seventh edition of the international standard for audio and video apparatus, IEC 60065. This two-day workshop will increase your proficiency in the basic safety concepts, general construction and testing requirements applied to products covered by IEC 60065 and UL 60065. The workshop provides a comprehensive treatment of the harmonized Standard and covers the relationship of UL 60065 to IEC 60065 as well as to the Canadian harmonized Standard CAN/CSA C22.2 No. 60065:03. In addition to a complete workshop manual, the materials also include a copy of the current version of UL 60065.  more...

UL Hazardous Locations Luminaire & Luminaire Fittings Certification Per UL 844 2009/04/07  April 7, 2009 Northbrook, IL In this comprehensive one-day workshop, you will learn about the latest requirements in the UL Standard 844 for UL certification of luminaires and luminaire fittings for hazardous (classified) locations. The standard UL 844 covers the construction and test requirements for the following luminaire types intended for installation and use in hazardous (classified) locations, Class I, Divisions 1 and 2, Groups A, B, C and D; Class II, Division 1, Groups E, F and G; Class II, Division 2, Groups F and G; and Class III, Divisions 1 and 2 in accordance with the National Electrical Code, NFPA 70: * Fixed and permanently installed luminaires * Portable luminaires * Paint spray booth luminaires * Emergency luminaries  more...

Industrial Control Panel UL 508A and Short-Circuit Current Ratings 2009/04/08  April 8-9, 2009 Meridian, ID The introduction of the new Article 409 for Industrial Control Panels in the 2005 edition of the National Electrical Code (NEC) drew increased attention to installations of industrial control panels. Industrial control panels (ICPs) with the UL Mark are installable to the NEC and have a distinct competitive edge in the marketplace. The first day of the workshop focuses on how to construct general use industrial control panels in accordance with the Standard for Industrial Control Panels, UL 508A, 1st Edition. It covers UL 508A, general use ICP construction, rating and marking requirements, sections 1-61; enclosure construction requirements, sections 62-64; component requirements, supplement SA and appendices A and B. The second day instructs existing industrial control panel customers on how to establish short-circuit ratings for individual industrial control panels in accordance with the requirements outlined in the new Standard for Industrial Control Panels, UL 508A, 1st Edition, Supplement SB. This supplement is the only method specifically noted as being approved by the 2005 NEC. Each participant will receive a participant workbook and a copy of the UL 508A Standard.   more...

Safety of Household and Similar Electrical Appliances; General Requirements, IEC 60335-1 2009/04/14  April 14-15, 2009 Research Triangle Park, NC Knowing how to use IEC 60335-1 effectively in a product's design phase is critical to its certification and acceptance within the global marketplace. This two-day technical workshop will give you in-depth exposure to essential topics such as spacing and insulation requirements, supply connections, component requirements and performance test criteria.  more...

Industrial Control Panel UL 508A and Short-Circuit Current Ratings 2009/04/14  April 14-15, 2009 Montreal, QC The introduction of the new Article 409 for Industrial Control Panels in the 2005 edition of the National Electrical Code (NEC) drew increased attention to installations of industrial control panels. Industrial control panels (ICPs) with the UL Mark are installable to the NEC and have a distinct competitive edge in the marketplace. The first day of the workshop focuses on how to construct general use industrial control panels in accordance with the Standard for Industrial Control Panels, UL 508A, 1st Edition. It covers UL 508A, general use ICP construction, rating and marking requirements, sections 1-61; enclosure construction requirements, sections 62-64; component requirements, supplement SA and appendices A and B. The second day instructs existing industrial control panel customers on how to establish short-circuit ratings for individual industrial control panels in accordance with the requirements outlined in the new Standard for Industrial Control Panels, UL 508A, 1st Edition, Supplement SB. This supplement is the only method specifically noted as being approved by the 2005 NEC. Each participant will receive a participant workbook and a copy of the UL 508A Standard.   more...

Hazardous Locations: Achieving Global Market Access 2009/04/15  April 15-16, 2009 Philadelphia, PA In this comprehensive two-day workshop, participants will learn about the latest requirements for electrical products intended for use in or related to potentially explosive atmospheres. Whether its Classes, Divisions or Zones, UL can help ensure you understand how to design your products for compliance to the proper atmospheric classification while providing you with greater worldwide market access. Get the answers to your hazardous locations questions by an expert from UL, the leaders in standards development.  more...

Test, Measurement and Laboratory Use Equipment: Designing for Compliance to UL 61010-1 2009/04/15  April 15-16, 2009 Brea, CA If you work with laboratory equipment and/or test & measuring equipment and similar products covered by UL61010-1 and IEC 61010-1, you will add important, practical skills to your technical capabilities. This intensive technical training includes how to apply the "two levels of protection" concept, measuring creepage and clearance based on the voltages and materials involved, and selecting components of appropriate integrity for use in non-energy limiting circuits. This workshop features additional topics including: The use of Amendments, Part 2 particular standards (e.g., for Probes and Centrifuges), the CB Scheme, and the benefits of using high integrity components. You will also learn about the National Differences contained in UL61010-1. You will also have the opportunity to participate in Practical Application Exercises in a cooperative team environment. An optional In-vitro Diagnostic Directive module will be provided after the main workshop concludes on the second day.  more...

Data Acceptance Program and ISO/IEC 17025 Requirements and Implementation 2009/04/16  April 16, 2009 Toronto, ON This 1-day workshop will cover ISO/IEC 17025 requirements within the context of the Data Acceptance Program (DAP). Program participants will gain an understanding of how the 17025 standard serves as the foundation for DAP as well as specific Management and Technical Requirements. In addition, the workshop also will cover specific Data Recording and Reporting fundamentals including key data sheet components that must be adequately complete.  more...

Designing for Compliance to UL 60079 Intrinsic Safety 2009/04/16  April 16, 2009 Northbrook, IL In this comprehensive one-day workshop you will learn about the latest requirements for intrinsically safe electrical products for hazardous locations (explosive atmospheres) applications. Electrical devices and systems considered “intrinsically safe” operate at an energy level deemed low enough to prevent arcs, sparks or heat (during normal or fault conditions), that could ignite a potentially explosive environment. There are numerous benefits associated with the use of intrinsically safe equipment as opposed to applying other protection techniques, such as explosion-proof enclosures. Intrinsically safe products generally have reduced installation costs, and potentially lower material and production costs. In addition, intrinsically safe equipment is suitable for use in Division 1 and is the only protection technique allowed to be used in Zone 0 classified locations.   more...

Photovoltaics: Overview of UL 1703 and IEC 61730 (Bundled Package) 2009/04/20  April 20-22, 2009 Dallas, TX This three-day workshop provides an overview of the requirements related to UL 1703 and IEC 61730. Participants will be able to identify the fundamental differences between the two standards. This course consists of classroom instruction, coupled with application exercises and quizzes. A copy of the UL 1703 Standard is included in your workshop materials.  more...

PCB Design Techniques for Real-World EMI Control presented by The EMC Chapter of the IEEE Milwaukee Section 2009/04/21  April 21 Milwaukee, WI Our 2009 EMC Seminar is our Ninth Year of Educational Seminar’s Sponsored by the EMC Chapter of the IEEE Milwaukee Section. Our Goal of providing EMC Seminars that are Local, Affordable and Providing the Highest Level of Educational Value is again accomplished through Mr. Bruce Archambeault. Mr. Archambeault is very excited to be coming back to Milwaukee to share his experiences with EMC Engineers and Technicians, Product Development Engineers and Engineering Managers. Our Program Committee invites you to participate in this year’s outstanding program. Join us in Welcoming Dr. Archambeault with some of Milwaukee’s Hometown Gemutlikeit! Proper Electromagnetic Compatibility design can make a significant difference in a final product's performance in the EMC Measurement Laboratory. Implementing the proper EMC practices during the design phase of the product is critical and can have little or no impact on the product cost when done correctly. Unfortunately, EMC design is considered to be similar to magic. This seminar focuses on the basic causes of EMC problems and how to overcome them. This seminar is not just a list of "rules of thumb" but rather it helps the student understand why EMC problems happen and what can be done to eliminate them. This seminar will cover some basics, such as the concepts of inductance and ground. Printed Circuit Board issues and concerns as well as power integrity (decoupling) will be discussed. Since not all EMI problems are related to PCB layout, we will also discuss non-PCB Radiating Structures such as heatsinks and interconnecting cables. All these areas must work together for the overall system to meet EMC requirements. Understanding the fundamental physics and causes are vital to your success.  more...

Fire 864: Fire Alarm Systems Control 101 2009/04/22  April 22-23, 2009 Northbrook, IL This two-day workshop of control unit and accessories for fire alarm systems standard 864 will focus on the construction, operation requirements, and efficacy testing of fire alarm units and systems. Participants will receive an overview of the standard as well as the product construction requirements. Other topics covered include performance monitoring for integrity requirements of protected premises units/systems, compatibility testing, and software assessment evaluation. Learners will also review the product marking and installation diagrams/instructions requirements as well as a typical product test plan.  more...

National Electrical Code for Photovoltaics 2009/04/23  April 23, 2009 Dallas, TX This one-day workshop will provide you with knowledge on the 2005/2008 National Electrical Code (NEC) for designing and installing photovoltaic (PV) systems. A basic knowledge of the NEC is required since Code basics will not be addressed. Conductor selection, ampacity calculations, overcurrent devices and disconnects will be covered along with utility-interactive systems. The knowledge gained will allow a person familiar with the Code basics to effectively design, install or inspect PV systems for Code compliance.  more...

Electric Signs: Designing for Compliance to UL 48 2009/04/23  April 23, 2009 Birmingham, AL In this one-day workshop you will learn the language of UL 48 and how to apply the key terms used in the standard. In addition, you will learn about marking requirements and documents used to evaluate signs. We will discuss critical construction and enclosure requirements, as well as as a number of other topics outlined below. The topics covered in this workshop are: * General information about UL and the Electric Sign Program * General requirements for all electric signs * Section signs * Components * Fluorescent sign requirements * Neon sign requirements * LED sign requirements * Other sign types * UL resources  more...

EMC by Your Design: Practical Applications Seminar/Workshop 2009/04/23  April 23, 24, 27 & 28 Northbrook, IL Join the growing numbers who benefit from training presented by instructors with combined experience of over 80 years experience in the industry and who remain current in the latest developments affecting EMC issues. Donald L. Sweeney, Roger Swanberg, and Corey Sweeney provide off-campus training to participants who have traveled from all borders of the United States, Canada, Mexico, and even Malaysia to take part in these sessions. Some companies send new staff as part of the ongoing orientation. In these sessions participants receive updates to the latest developments in research, standards, regulations, instrumentation and services.  more...

Risk Management and Risk Management Writing: Secrets for Avoiding Liability and Creating Accurate Powerful Documents 2009/04/29  April 29-30, 2009 Minneapolis, MN Risk Management for Medical Devices in Compliance with ISO 14971 teaches the purpose of risk management as required by the regulatory authorities around the world. Risk Management Writing teaches how a firm through its written communication can demonstrate the firm’s risk management activities. Using case studies, role playing exercises, and group discussions, the course illustrates how employees can create records that show that the manufacturer had a well thought out program to manufacture effective and reliable products that were not defective or dangerous for their intended uses. Risk Management for Medical Devices Overview: Risk Management for Medical Devices in Compliance with ISO 14971 teaches the purpose of risk management as required by the Regulatory Authorities around the world. It provides a practical application that attendees will use as a model for applying risk management to their own situation. This workshop is a prelude to the third edition of IEC 60601-1 that requires the application of ISO 14971 to the design and manufacture of a medical device. For a complete course description on this portion of the 2-day workshop, please click here. Risk Management Writing: Secrets for Avoiding Liability and Creating Accurate Powerful Documents Overview: Many employees in FDA regulated industries just don’t get it. They fail to understand the importance of their documents in the firm’s manual or electronic files. An FDA official or a jury in a product liability case will look at the documents and determine if the firm placed its quarterly revenue goals ahead of the safety of the patients that use its products.   more...

ANTENNAS: Principles, Design, and Measurements A Short Course on Antennas, Including Wireless Communications 2009/05/12  May 12 - 15 Annapolis, Maryland The four-day short course treats fundamental antenna concepts and modern applications, including antennas for wireless. Many examples and design procedures are covered. This is the longest running short course on the topic of antennas and is in its twenty-third year. Who Should Take the Course Engineers who use antennas Engineers involved in communication systems Wireless engineers or managers EMC engineers Topics (detailed contents) Antenna fundamentals Arrays Wire antennas Broadband antennas Aperture antennas: Horns and reflectors Computational codes for antennas Communication systems Wireless and cellular antennas Smart antennas EMC topics Antenna measurements   more...

IEW 3rd Annual International Electrostatic Discharge Workshop 2009/05/18  May 18-21 Stanford Sierra Conference Center, Lake Tahoe, CA This Workshop provides a unique environment for envisioning, developing and sharing ESD design and test technology for present and future semiconductor applications. The Workshop will focus on robust design and test of ESD protection for state-of-the-art integrated circuits and systems as well as advanced semiconductor system on chip (SOC) and system in package (SIP) applications. Register before April 1st and save!  more...

Registration Underway for the 3rd Annual International Electrostatic Workshop (IEW) 2009/05/18  May 18 - 21 South Lake Tahoe, CA The Electrostatic Discharge Association (ESDA), in conjunction with IEEE, Electron Devices Society and Reliability Society, will host the 3rd Annual International Electrostatic Workshop (IEW) May 18-21 at the Stanford Sierra Conference Center in South Lake Tahoe, California. The Program consists of technical sessions, moderated discussion groups, open poster sessions, seminars, special interest groups and a keynote address. The IEW will focus on robust design and test of ESD protection for state-of-the-art integrated circuits as well as advanced system on chip (SOC) and system in package (SIP) applications. The Workshop provides a unique environment for envisioning, developing, and sharing ESD design and test technology for present and future semiconductor applications. “The format provides an interactive learning atmosphere that will provide attendees the opportunity to learn from experts in various fields as well as from their peers,” said Jim Miller, IEW Finance, Registration and Arrangements Chair. The Stanford Sierra Conference Center provides an ideal setting for the Workshop. The isolated location and the absence of distractions, such as no in-room phones or television sets, encourages extensive interaction among Workshop attendees. Visit www.esda.org/iew.htm for additional details about the program, registration costs, and for a downloadable registration form.   more...

EASTEC 2009 Exposition 2009/05/19  May 19 - 21 W. Springfield, MA Even in a tough economy, manufacturing still matters! And staying competitive couldn't be more critical. Since 1979, EASTEC has been part of the East Coast manufacturing landscape. Whether you plan to serve medical, aerospace and defense, and other growth industries or just keep current customers satisfied, EASTEC should be your first stop. This is where you'll get valuable insights into technologies, methods, and management ideas to keep your business in business -- even in difficult times. Find out why more than 440,000 East Coast manufacturers have counted on EASTEC to keep their businesses pulsing.  more...

MIL-STD-461F Course for 2009 presented by Washington Laboratories, Ltd. 2009/06/08  June 8 - 11 Approved on December 10, 2007, the newly released MIL-STD-461F supersedes MIL-STD-461E. This course offers critical information for military professionals involved in complex military system development. Includes hands-on instruction in MIL-STD-461 test and measurement methods along with analysis of the test results. For more information on course content, click here. Who Should Attend? Test Engineers Test Technicians Anyone who interprets MIL-STD data Anyone who troubleshoots MIL-STD equipment MIL-STD design Engineers   more...

Tech Tour 2009/06/22  June 22 Delhi, India Tech Tour is a practical training and lecture series for professional engineers in the RF, EMC and Wireless industries. The goal of each Tech Tour is to impart practical, useful information that results in better measurements and improved efficiency. Tech Tour is interactive in nature and attendees are encouraged to ask questions, see demonstrations and network with speakers and fellow professionals - all in an open atmosphere. A bound copy and of the presentations are provided for future reference along with a CD of both ETS-Lindgren and Agilent Technologies brochures and application notes. “We have partnered with Agilent on many projects in Asia involving complete test systems for RF, EMC and Wireless Testing,” said Mark Mawdsley, Managing Director for ETS-Lindgren Asia Pacific Operations. “With our chamber expertise and Agilent’s instrumentation expertise, our customers can be confident in our turn-key solutions,” he added. “The Tech Tours provide an opportunity to share this system expertise with the local engineering community and expand our collective knowledge base in the rapidly growing technical community in Asia,” said Ken Koehn, Global Channels Program Manager for Agilent Technologies. There is no cost to attend the Tech Tours, but advance registration is required.  more...

Tech Tour 2009/06/24  June 24 Pune, India Tech Tour is a practical training and lecture series for professional engineers in the RF, EMC and Wireless industries. The goal of each Tech Tour is to impart practical, useful information that results in better measurements and improved efficiency. Tech Tour is interactive in nature and attendees are encouraged to ask questions, see demonstrations and network with speakers and fellow professionals - all in an open atmosphere. A bound copy and of the presentations are provided for future reference along with a CD of both ETS-Lindgren and Agilent Technologies brochures and application notes. “We have partnered with Agilent on many projects in Asia involving complete test systems for RF, EMC and Wireless Testing,” said Mark Mawdsley, Managing Director for ETS-Lindgren Asia Pacific Operations. “With our chamber expertise and Agilent’s instrumentation expertise, our customers can be confident in our turn-key solutions,” he added. “The Tech Tours provide an opportunity to share this system expertise with the local engineering community and expand our collective knowledge base in the rapidly growing technical community in Asia,” said Ken Koehn, Global Channels Program Manager for Agilent Technologies. There is no cost to attend the Tech Tours, but advance registration is required.  more...

Hyderabad 2009/06/26  June 26 Hyderabad, India Tech Tour is a practical training and lecture series for professional engineers in the RF, EMC and Wireless industries. The goal of each Tech Tour is to impart practical, useful information that results in better measurements and improved efficiency. Tech Tour is interactive in nature and attendees are encouraged to ask questions, see demonstrations and network with speakers and fellow professionals - all in an open atmosphere. A bound copy and of the presentations are provided for future reference along with a CD of both ETS-Lindgren and Agilent Technologies brochures and application notes. “We have partnered with Agilent on many projects in Asia involving complete test systems for RF, EMC and Wireless Testing,” said Mark Mawdsley, Managing Director for ETS-Lindgren Asia Pacific Operations. “With our chamber expertise and Agilent’s instrumentation expertise, our customers can be confident in our turn-key solutions,” he added. “The Tech Tours provide an opportunity to share this system expertise with the local engineering community and expand our collective knowledge base in the rapidly growing technical community in Asia,” said Ken Koehn, Global Channels Program Manager for Agilent Technologies. There is no cost to attend the Tech Tours, but advance registration is required.  more...

IMETI 2009 2009/07/10  July 10 - 13 Orlando, FL Engineering activities are based on the development of new Knowledge (scientia), new 'made things' (techné) and/or new ways of working and doing (praxis). Scientia, Techné and praxis are three important dimensions of a comprehensive conception of Engineering as a whole. Engineering, as Scientia, is mostly developed in academia; as techné is practiced in industry generating technological innovations; and as praxis is carried out in technical and non-technical organizations, supporting managerial activities and technical procedures, via methodical and methodological design and implementation. This is why Engineering provides one of the most solid academic and professional substrata for bridging among Universities, industries and governments. Publications and conferences related to Engineering are usually oriented to one of its three dimensions. While this is an adequate thing to do when disciplinary focus is sought, it does not represent Engineering as a whole and it misses the very important synergic relationships among the three kinds of engineering activities mentioned above. This is why a group of scholars, professionals and consultants, in the field of engineering, considered the possibility of initiating a publishing process and organizing a conference where presentations will not be reduced to one of the Engineering's dimensions, but to foster the participation of academics, practitioners and managers in the three dimensions of Engineering, in the same conference, or in the same publication, so they can synergistically interact with each other. A consequence of this purpose is the organization of IMETI 2009, and the publication of multiple-author books series, where submissions will be accepted for the presentation of: New knowledge (Engineering as Scientia); New products and services, i.e. technological innovations (Engineering as techné); New technical and managerial methods and methodologies (Engineering as praxis); New meta-engineering (Engineering of Engineering activities) knowledge, innovations and methodologies.   more...

IEEE EMC Society Symposium on Electromagnetic Compatibility EMC Austin Style 2009/08/17  August 17-21, 2009 Austin, TX Attend the IEEE EMC Society Symposium on Electromagnetic Compatibility in Austin, Texas August 17 - 21, 2009 and experience "EMC Austin Style" in "The Live Music Capital of the World"! EMC Symposium participants will enjoy attending events at the spacious and modern Austin Convention Center, just across the street from our host hotel, the new Hilton Hotel. Both are located a short walk away from Sixth Street, where the entertainment venues, funky boutiques, casual coffee shops, night-time hot spots and art galleries abound. Benefits of Attending Hear top-rated peer reviewed technical papers presented by experts in multi-track sessions over a three-day period Attend two days of practical peer reviewed workshops and tutorials See experiments and demonstrations presented by experts Visit exhibitors and see the latest test equipment and measurement systems Tour a local manufacturer of EMC and acoustic systems Renew friendships and network with industry gurus Share fun-filled social events with family and special friends   more...

Antenna Systems Conference 2009 2009/09/01  September 1 - 2 Philadelphia, PA / Hyatt Regency Philadelphia at Penn's Landing The 2009 Antenna Systems Conference is a two-day international conference focused on the latest and most important advancements in antenna systems and technology. The conference will also feature a track dedicated to short-range wireless standards, applications and technology. To learn more & to register visit our site.   more...

MIL-STD-461F Course for 2009 presented by Washington Laboratories, Ltd. 2009/09/21  September 21 - 24 Approved on December 10, 2007, the newly released MIL-STD-461F supersedes MIL-STD-461E. This course offers critical information for military professionals involved in complex military system development. Includes hands-on instruction in MIL-STD-461 test and measurement methods along with analysis of the test results. For more information on course content, click here. Who Should Attend? Test Engineers Test Technicians Anyone who interprets MIL-STD data Anyone who troubleshoots MIL-STD equipment MIL-STD design Engineers   more...

MIL-STD-461F Course for 2009 presented by Washington Laboratories, Ltd. 2009/11/09  November 9 - 12 Approved on December 10, 2007, the newly released MIL-STD-461F supersedes MIL-STD-461E. This course offers critical information for military professionals involved in complex military system development. Includes hands-on instruction in MIL-STD-461 test and measurement methods along with analysis of the test results. For more information on course content, click here. Who Should Attend? Test Engineers Test Technicians Anyone who interprets MIL-STD data Anyone who troubleshoots MIL-STD equipment MIL-STD design Engineers   more...