|
 |
The International Electrotechnical Commission (IEC) has announced the availability of the following new standards and documents (additional information is available at www.iec.ch, or the IEC’s U.S. representative, ANSI, at www.ansi.org):
Electrical Engineering
- IEC 60255-22-2 Ed. 3.0 (2008-04) Measuring relays and protection equipment - Part 22-2: Electrical disturbance tests - Electrostatic discharge tests
- IEC 60255-22-4 Ed. 3.0 (2008-04) Measuring relays and protection equipment - Part 22-4: Electrical disturbance tests - Electrical fast transient/burst immunity test
- IEC 60282-2 Ed. 3.0 (2008-04) High-voltage fuses - Part 2: Expulsion fuses
- IEC 60317-0-3 Ed. 3.0 (2008-04) Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire
- IEC 60404-2 Amd.1 Ed. 3.0 (2008-04) Amendment 1 - Magnetic materials - Part 2: Methods of measurement of magnetic properties of electrical steel sheet and strip by means of an Epstein frame
- IEC 60432-3 Amd.2 Ed. 1.0 (2008-04) Amendment 2 - Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)
- IEC 60598-1 Ed. 7.0 (2008-04) Luminaires - Part 1: General requirements and tests
- IEC 60598-2-22 Ed. 3.2 (2008-04) Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting
- IEC 60730-2-14 Ed. 1.2 (2008-04) Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators
- IEC 61058-1 Ed. 3.2 (2008-04) Switches for appliances - Part 1: General requirements
- IEC 61169-4 Ed. 1.0 (2008-04) Radio-frequency connectors - Part 4: RF coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock - Characteristic impedance 50 Ω (type 7-16)
- IEC 61643-21 Amd.1 Ed. 1.0 (2008-04) Amendment 1 - Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
- IEC 62271-100 Ed. 2.0 (2008-04) High-voltage switchgear and controlgear - Part 100: Alternating current circuit-breakers
- IEC 62420 Ed. 1.0 (2008-04) Concentric lay stranded overhead electrical conductors containing one or more gap(s)
Electromagnetic Compatibility
- IEC 61000-4-3 Ed. 3.1 (2008-04) Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
Fibre Optic Communications
- IEC 60794-2-50 Ed. 1.0 (2008-04) Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies
- IEC 60794-3-30 Ed. 2.0 (2008-04) Optical fibre cables - Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lakes, river crossings and coastal applications
- IEC 61290-11-1 Ed. 2.0 (2008-04) Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME)
- IEC 61758-1 Ed. 1.0 (2008-04) Fibre optic interconnecting devices and passive components - Interface standard for closures - Part 1: General and guidance
Household
- IEC 60335-2-17 Amd.2 Ed. 2.0 (2008-04) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads and similar flexible heating appliances
- IEC 60335-2-39 Amd.2 Ed. 5.0 (2008-04) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
- IEC 60335-2-49 Amd.1 Ed. 4.0 (2008-04) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm
- IEC 60730-2-7 Ed. 2.0 (2008-04) Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches
Medical Electrical Equipment
- IEC 60601-1 Ed. 3.0 (2008-04) Interpretation sheet 1 - Medical electrical equipment - Part 1: General requirements for basic safety and essential requirements
- IEC 60601-2-16 Ed. 3.0 (2008-04) Medical electrical equipment - Part 2-16: Particular requirements for basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment
- IEC 60601-2-33 Ed. 2.2 (2008-04) Medical electrical equipment - Part 2-33: Particular requirements for the safety of magnetic resonance equipment for medical diagnosis
- IEC 61217 Ed. 1.2 (2008-04) Radiotherapy equipment - Coordinates, movements and scales
Safety
- IEC 60695-8-3 Ed. 1.0 (2008-04) Fire hazard testing - Part 8-3: Heat release - Heat release of insulating liquids used in electrotechnical products
- IEC 62061 Ed. 1.0 (2008-04) Corrigendum 2 - Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
Testing
- IEC 60068-2-64 Ed. 2.0 (2008-04) Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
- IEC 60068-2-69 Ed. 2.0 (2007-05) - Part 2-69: Tests - Test Te: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method. This bilingual version corresponds to the English version.
Top of Page
|
|
|
